Metal Fan Guards: What They Do and Where They Are Used

Metal fan guards protect fingers, cables and fan blades with minimal airflow loss. See where wire fan guards are used: PC power supplies, solar inverters, welders, medical equipment and more.

metal-fan-guard
A metal fan guard (also called a wire fan grille or finger guard) is the round wire cover mounted over a cooling fan. It looks simple, but it is a safety part, a protection part and an airflow part at the same time. This article explains what a fan guard actually does, and where metal fan guards are used — from PC power supplies to solar inverters, welding machines and medical equipment.
What Does a Metal Fan Guard Do?
  • 
Keeps fingers away from the blades. A fan spinning at several thousand rpm can injure a technician or end user. The concentric wire rings are spaced so fingers cannot reach the blades, which helps equipment pass safety inspections.
Protects the fan itself. The guard stops cables, tools and loose parts from falling into the impeller, and keeps internal wiring from being pulled into the blades — a common cause of fan failure inside power equipment.
Lets the air through. Unlike a solid cover, an open wire grille adds very little airflow resistance and almost no noise, so the fan keeps most of its rated cooling performance.
Adds structure and options. Welded steel wire is rigid and heat-resistant. Where dust is also a problem, an aluminum-frame filter mesh can be fitted over the guard to combine protection with dust filtration.




PC Power Supplies
The PC power supply is the classic fan guard application. Guards from 40 mm to 120 mm cover the intake or exhaust fan of ATX and industrial power supplies, in bright nickel-chrome or black finishes that match the enclosure.

Metal fan guard fitted over the cooling fan of a PC power supply




Solar Inverters and Energy Storage
Solar inverters work outdoors for years, and their cooling fans run for long hours in heat and dust. A metal fan guard protects the fan from debris and accidental contact during installation and maintenance, and stainless steel wire is available for humid or coastal sites where corrosion is a concern.
Solar inverter cooling fan protected by a metal fan guard




Welding Machines
Inverter welding machines use powerful fans — often 150 mm to 200 mm — to cool the power electronics, and they work in workshops full of cables, gloves and metal parts. A rigid wire guard keeps all of that out of the blades while withstanding the heat and vibration of a welding environment.

Metal fan guard protecting the cooling fan of a welding machine




Medical Equipment and Radiators
Medical devices, laboratory instruments and liquid-cooling radiators use smaller, quieter fans, but the requirement is the same: nothing may touch the blades, and airflow must stay stable over years of service. Fan guards and matching filter meshes are used on cooling fans, radiator fans and equipment vents throughout this field.
Metal grille cover on a radiator heat exchanger


Liquid cooling radiator with a protective mesh cover




Fans, Blowers and Refrigeration
Finally, fan guards are fitted directly to axial fans and blowers themselves — in HVAC units, refrigeration equipment, air purifiers and control cabinets — wherever a spinning fan is within reach or exposed to its surroundings.
Large wire fan guard on an industrial condenser fan




Choosing the Right Fan Guard
Match the guard to the fan size first: standard sizes run from 40 mm to 200 mm, and custom sizes from 20 mm to 400 mm can be made to a drawing or sample. Then choose the material (steel wire, or stainless steel for corrosive environments) and the finish (nickel-chrome or black). All of our guards are RoHS and REACH compliant. You can browse our metal fan guards in standard sizes, or contact us with your fan model or drawing for a custom match.